Friendswood Shower Glass does one thing: custom shower glass. We're run by a local general contractor — Resnick General Contractors — with our own dedicated installer, not a crew driving in from northwest Houston. Email us a picture of your shower and we'll price it from the photo; we can usually get the glass measured, built, and installed in about a week.
Email photos of your shower opening and we'll reply with a ballpark range within one business day — before anyone sets foot in your house.
General glass shops split their week between storefronts, mirrors, and window repairs. Every job on our schedule is a shower — which is why our measuring, fabrication, and install timelines stay tight. Prices below are our typical installed prices; email us a picture of your shower and we'll confirm where your job lands.
The classic primary-bath upgrade: a heavy 3/8″ or 1/2″ tempered door on solid brass hinges, with fixed panels cut to your exact opening — including out-of-plumb walls, which are the norm in 1980s–2000s homes here.
Single panel + door & hardware: typically $1,200–$1,800 installed
Barn-door style sliders on an exposed top rail. The right call when a swinging door would hit a vanity or toilet, and for wide alcove openings up to 72″. Soft-close hardware available.
Typically $1,300–$1,900 installed
Floor-to-ceiling glass with an operable transom panel to vent steam, sealed with steam-rated gasketing. Built for the bigger primary suites going into new construction in Manvel, Iowa Colony, and Rosharon.
Typically $3,200–$6,500 installed
Two-sided and angled enclosures for corner showers and smaller secondary baths. Custom angles are templated on site, so the glass follows your tile — not a kit's idea of your tile.
Typically $2,200–$4,400 installed
Cleaner, sturdier replacements for builder-grade framed doors and tub sliders, without going full frameless. Hardware in matte black, chrome, brushed nickel, and brushed bronze to match your fixtures.
Typically $1,200–$2,400 installedWalk-in splash panels for curbless and open showers — typically $900–$1,700 installed. We also remove old enclosures (included with a new install), replace worn seals and sweeps, and re-hang doors that have started to drag.
Repairs & re-seals quoted from an emailed photoMost local glass shops won't quote until they've measured — and the out-of-town specialists won't quote at all without a site visit. These are our typical installed prices, and they're the same numbers we quote from your emailed photo: a single panel with a door and hardware runs $1,200–$1,800, and a typical sliding glass door runs $1,300–$1,900. Your written quote after the free measure is a fixed price, not a range.
| Enclosure | Typical installed price |
|---|---|
| Single panel with door & hardwareFrameless hinged door + one fixed panel, 3/8″ clear tempered, hardware included | $1,200–$1,800 |
| Large primary-bath framelessDoor + two panels, or openings over 60″ — larger and multi-panel layouts price above the typical single-panel job | $2,800–$4,500 |
| Sliding glass doorFrameless barn-door style slider, single or double, soft-close available | $1,300–$1,900 |
| Semi-frameless hinged or slidingMinimal framing, 1/4″–3/8″ glass | $1,200–$2,400 |
| Corner / neo-angle framelessTemplated custom angles included | $2,200–$4,400 |
| Steam enclosure, floor-to-ceilingIncludes operable transom and steam-rated seals | $3,200–$6,500 |
| Walk-in splash panelSingle fixed panel, wall or ceiling braced | $900–$1,700 |
| Old enclosure removal & haul-awayFree with any new enclosure install | Included |
These are our typical installed prices for standard openings in good condition. Final price depends on exact measurements, glass thickness, hardware finish, and site conditions — and is fixed in writing after your free in-home measure. No travel surcharge inside our 60-mile service area.
Slide in your opening width and pick a style. This is the same math behind our photo quotes — a planning range, not a bid.
Estimated installed range for a 48″ frameless hinged door + panel in 3/8″ glass. Email us a photo and we'll narrow it to a single fixed price after a free measure.
We can usually get the glass installed in a week. Custom glass has one unavoidable wait: tempering. Everything around it, we control — and because we're local, the measuring and install trips are short ones.
Email two or three photos of your shower opening plus a rough width and your city. Within one business day you get a ballpark range from the published table above — no obligation, no site visit needed yet. That's how most of our quotes start.
We laser-measure the opening, check walls for plumb, and template any custom angles. You choose glass thickness and hardware finish, and leave with a fixed written price.
Your glass is cut, polished, drilled, and tempered to those measurements. This is the step that can't be rushed — tempered glass can't be trimmed after the fact, which is why the measure matters.
Most installs take 2–4 hours. Our own dedicated installer removes and hauls away the old enclosure, sets and seals the new glass, adjusts the door swing, and walks you through care before we leave.
The big frameless specialists are based in northwest Houston. The glass shops on the south side do showers between window jobs. We're the option in between: shower-only, and ten minutes away.
Email a picture of your shower and we price it from the photo — ballpark back within one business day. It works because we know what these jobs cost: a single panel with door and hardware is typically $1,200–$1,800, and a sliding door $1,300–$1,900. Most local competitors don't publish prices or timelines anywhere.
A door that settles and starts to drag, a sweep that needs replacing — when the installer is in Friendswood, the fix is a short trip, not a route-scheduling exercise.
Friendswood, Pearland, and League City subdivisions from the 1980s–2000s share the same framing quirks and out-of-plumb tile. We've measured enough of them to template for it.
One price covers the whole service area — Galveston Island second homes included, scheduled in grouped trips each week.
Friendswood Shower Glass is backed by Resnick General Contractors — the owner is a working general contractor, and your glass is set by our own dedicated installer, not a rotating sub crew. Resnick's posts and videos show shower glass installs we've completed.
That's the whole southeast side of the metro: down the Gulf Freeway to Galveston, up SH-288 to downtown, out to Katy, The Woodlands, and Baytown. Tap a town to find it on the map. Drive times are typical from our Friendswood base.
The shaded circle is a true 60-mile radius from Friendswood. Galveston Island jobs are scheduled in grouped trips each week; everything inside the circle gets the same published pricing with no travel surcharge.
Bathroom remodels stall at the glass step more than any other. We work as a reliable glass sub for GCs and remodelers across the SH-288 and Clear Lake corridors.
That's how most of our quotes start. Email a picture of your shower and we'll price it from the photo — a single panel with a door and hardware typically runs $1,200–$1,800, and a sliding glass door $1,300–$1,900, with your ballpark back within one business day.
Opens your email app addressed to [email protected] — just attach your photos and send.
Prefer to write it out? Use the form — it builds a ready-to-send email with your details filled in; just attach your photos before you send. Or write to us directly: [email protected].
Based in Friendswood, TX · FriendswoodShowerGlass.com
Contractors: use the same form and choose “Trade / contractor” — measures are scheduled within 2 business days.
Open it in your email app and attach 2–3 photos of the shower opening — that's the fastest way to get your ballpark. Our email is [email protected].